Reliable Concrete Production with a Compact and Efficient Batching System
A stationary concrete batching plant is an ideal solution for construction projects that require a stable supply of high-quality concrete with accurate proportioning and efficient production.
The JINYI 35 m³/h Stationary Concrete Batching Plant is designed with a three-bin aggregate batching system, independent weighing of each aggregate, and skip hoist feeding. This configuration provides accurate aggregate measurement while maintaining a compact plant layout, making it suitable for projects where production efficiency, weighing accuracy, and installation space are important considerations.
1. 35 m³/h Concrete Production Capacity
The plant is designed for a nominal production capacity of approximately 35 m³ of concrete per hour, making it suitable for small- to medium-scale construction projects requiring a continuous and reliable concrete supply.
Compared with mobile concrete mixing equipment, a stationary batching plant is better suited to projects where the equipment will remain at one location for an extended period.
Typical applications include:
- Building construction
- Road and highway construction
- Bridge projects
- Foundation and structural concrete works
- Industrial construction
- Commercial concrete production
- Infrastructure development
The actual production output depends on factors such as aggregate feeding efficiency, concrete mix design, loading and unloading cycles, and operating conditions.
2. Three Aggregate Bins with Independent Weighing
One of the key features of this batching plant is its three-bin aggregate batching system.
Each aggregate bin is equipped with an independent weighing system, allowing different types of aggregates to be measured separately before entering the mixer.
This configuration provides better control over the aggregate proportions and helps improve batching accuracy and concrete consistency.
The three bins can be configured according to the customer’s concrete mix requirements, for example:
- Sand
- Gravel
- Crushed stone
The actual aggregate configuration can be adjusted according to the required concrete mix design and local material conditions.
Advantages of Independent Aggregate Weighing
Accurate proportioning
Each aggregate is weighed independently according to the preset recipe.
Consistent concrete quality
Accurate batching helps maintain stable proportions from one production cycle to the next.
Flexible mix designs
Different aggregate ratios can be programmed according to different concrete grades and applications.
Efficient batching
The independent weighing system allows the batching process to be controlled systematically.
3. Skip Hoist Aggregate Feeding System
The aggregate feeding system uses a skip hoist, also commonly referred to as a bucket hoist or skip elevator.
After the aggregates are accurately weighed, the batching system discharges them into the skip. The skip then lifts the materials to the mixer for the next stage of concrete production.
Compared with a conventional belt conveyor arrangement, a skip hoist system can provide a more compact plant layout.
Why Choose a Skip Hoist?
- Compact equipment arrangement
- Reduced plant footprint
- Suitable for projects with limited installation space
- Efficient vertical aggregate transfer
- Simplified plant layout
- Convenient for small and medium-capacity batching systems
This makes the 35 m³/h configuration particularly suitable for customers looking for a compact stationary concrete batching plant without sacrificing batching accuracy.
4. Efficient Concrete Mixing System
After the aggregates are measured and transferred by the skip hoist, they enter the concrete mixer together with the required cement, water and admixtures.
The mixing process is controlled according to the preset batching recipe to ensure that the different materials are thoroughly mixed before discharge.
A properly configured mixing system helps provide:
- Uniform concrete mixing
- Stable concrete quality
- Reliable production cycles
- Efficient material utilization
The mixer configuration can be selected according to the required concrete production capacity and project requirements.
5. Automated Batching and Control System
The concrete batching plant can be equipped with an automated control system for centralized operation of the batching, weighing, feeding and mixing processes.
The operator can set the required concrete mix proportions through the control system. The system then controls the corresponding material weighing and feeding sequence according to the preset recipe.
The control system helps operators achieve:
- Accurate material proportioning
- Repeatable batching cycles
- Centralized equipment control
- Easier operation
- Improved production management
For commercial or long-term construction projects, an automated batching system can also make production management more convenient.
6. Compact Stationary Plant Design
The 35 m³/h stationary concrete batching plant is designed for customers who need a fixed concrete production system but do not require the capacity of a large commercial batching plant.
The combination of three-bin independent aggregate weighing and skip hoist feeding helps keep the overall equipment arrangement compact.
This design can be particularly useful when:
- Installation space is limited
- The plant will remain at one construction site
- Concrete demand is moderate
- Accurate aggregate batching is required
- The customer wants a cost-effective stationary solution
7. Suitable for a Wide Range of Construction Projects
The 35 m³/h batching plant can be used for different types of construction and infrastructure projects.
Building Construction
Suitable for foundations, columns, beams, slabs and other structural concrete applications.
Road Construction
Provides a continuous concrete supply for road bases, pavements and related infrastructure works.
Bridge Construction
Can be used to produce concrete for bridge foundations, piers and structural components.
Industrial Projects
Suitable for factories, warehouses, workshops and other industrial construction projects.
General Infrastructure
The plant can also be used for various municipal and infrastructure projects requiring a stable on-site concrete supply.
8. Why Choose a 35 m³/h Stationary Batching Plant?
For customers with moderate concrete demand, selecting an appropriately sized batching plant can help avoid unnecessary equipment investment while maintaining reliable production.
The JINYI 35 m³/h configuration offers several practical advantages:
35 m³/h nominal capacity
Suitable for small- and medium-scale concrete production requirements.
3 aggregate bins
Allows multiple aggregate types to be stored and batched separately.
Independent aggregate weighing
Provides individual measurement and better control of aggregate proportions.
Skip hoist feeding
Creates a compact material transfer arrangement and reduces the required plant footprint.
Stationary design
Suitable for long-term operation at a fixed project site.
Automated control
Provides centralized management of the batching and mixing process.
9. Technical Configuration
| Item | Specification |
|---|---|
| Plant Type | Stationary Concrete Batching Plant |
| Nominal Capacity | 35 m³/h |
| Aggregate Bins | 3 Bins |
| Aggregate Weighing | Independent Weighing |
| Aggregate Feeding | Skip Hoist |
| Cement Feeding | Cement Screw Conveyor |
| Water System | Automatic Water Weighing/Feeding |
| Admixture System | Optional / According to Mix Design |
| Control System | Automatic Control System |
| Application | Construction & Infrastructure Projects |
Note: The final equipment configuration can be customized according to the customer’s concrete mix design, aggregate characteristics, power supply, site conditions and production requirements.
10. JINYI Concrete Batching Plant Solutions
As a professional manufacturer and exporter of concrete machinery, Henan JINYI Machinery Co., Ltd. provides concrete batching plants and related equipment for customers in international markets.
Our batching plant solutions can be configured according to different production capacities, aggregate batching requirements, feeding methods and project conditions.
For customers who need a 35 m³/h stationary concrete batching plant with three aggregate bins, independent aggregate weighing and skip hoist feeding, this configuration provides a practical balance between production capacity, batching accuracy, equipment layout and investment cost.
If you are planning a new construction project or need a reliable on-site concrete production system, contact JINYI for a customized batching plant solution.
Get a Quote
Website: jinyiconcrete.com
Email: info@jinyiconcrete.com
WhatsApp / Phone: +86 186 2550 4560